Smc-networks SMC Barricade Plus SMCBR18VPN Manuel d'utilisateur télécharger pdf (Page 41)

7.10 | Advanced Setup - SNMP

The Simple Network Management Protocol (SNMP) lets you manage a computer network

remotely by polling and setting terminal values and monitoring network events.

• Enable SNMP: You can check Local, Remote, or both options to enable the SNMP

function.

o If Local is checked, the router responds only to requests from the LAN.

o If Remote is checked, the router responds only to requests from the WAN.

• Get Community: Setting this option allows the router respond to a request.

• Set Community: Setting this option allows your router to accept a request.

7.11 | Advanced Setup - ROUTING

The Routing Table lets you determine which physical interface address to use for outgoing IP

data grams. If you have more than one router and subnet, you will have to enable the routing

table to allow packets to find the routing path. This allows different subnets to communicate with

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 72 73

Pas de commentaire

Smc-networks SMC Barricade Plus SMCBR18VPN Manuel d'utilisateur Page 41