Smc-networks EtherNet/IP EX500-GEN1 Manuel d'utilisateur télécharger pdf (Page 20)

3736

M12, 5-pin, reverse key, socket

Power supply wiring

When combining EX9-OEP1 ( or EX9-OEP2 ) and EX9-PE1 and using external power

supply, connect the power supply to the power input connector of EX9-PE1.

When selecting power supply, refer to "Handling precautions" ( page 3 ) in this manual.

EX9-PE1 power supply connector No.0

M12, 5-pin, reverse key, plug

EX9-PE1 power input connector No.1

Note : Each signal of connector No.0 is connected to corresponding signal of connector No.1.

The pins whose applications are shown in brackets [ ], are prepared supplementarily

and not used normally.

Power supply

connector No.0

Power input

connector No.1

Pin No.

Power input connector No.1 Power supply connector No.0

Power supply for output devices ( 24VDC )

Power supply for output devices ( 0V )

[ Power supply for output devices ( 0V ) ]

[ Power supply for sensor ( 24VDC ) ]

[ Power supply for sensor ( 0V ) ]

Ground

[ Power supply for sensor ( 24VDC ) ]

[

Power supply for sensor ( 0V ) ]

[

Ground ]

Keep the waterproof cap mounted on power supply connector No.0 while using

EX9-PE1. This connector is prepared supplementarily and not used normally.

Note

Wiring ( continued )

Pin alignment and connection drawing of the Power Supply Cable

Socket connector pin layout ( Reverse key )

EX9-AC -1

M12

φ6.4

30 5

48.1

Pin No

Cable color : Signal name

Brown : Power supply for output ( 24VDC )

White : Power supply for output ( 0V )

Blue : [

Power supply to sensor (

24VDC )

]

Black : [

Power supply to sensor ( 0V ) ]

Gray :

Ground ( PE )

1 2 ... 15 16 17 18 19 20 21 22 23

Commentaires sur ces manuels

Pas de commentaire

Smc-networks EtherNet/IP EX500-GEN1 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Smc-networks EtherNet/IP EX500-GEN1