Smc-networks Barricade SMC7004ABR Manuel d'utilisateur télécharger pdf (Page 29)

NSTALLATION

2-9

Note: When connecting to the WAN port, use 100-ohm Category

3, 4 or 5 shielded or unshielded twisted-pair cable with

RJ-45 connectors at both ends for all connections.

Connect a Printer

If you connect a printer to the Barricade, all the computer users

connected to your LAN can have access to this printer. Connect a

standard parallel printer cable to the Printer port on the Barricade,

and configure the printer server as described on page 6-1.

Connecting the Power Adapter

Plug the power adapter into the power socket on the Barricade,

and the other end into a power outlet. Check the indicator marked

Power on the front panel to be sure it is on. If the Power i

ndicator

does not light up, refer to Troubleshooting in Appendix A

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 111 112

Pas de commentaire

Smc-networks Barricade SMC7004ABR Manuel d'utilisateur Page 29