Smc-networks SMCBR21VPN Manuel d'utilisateur télécharger pdf (Page 38)

WAN1 and WAN2 Interface can use Assist to enter the data.

After setting, there will be two subnet in LAN: 192.168.1.0/24 (default LAN subnet)

and 162.172.50.0/24. So if LAN IP is:

˙192.168.1.xx, it must use NAT Mode to access to the Internet. (In Policy it only can

setup to access to Internet by WAN2. If by WAN1 Routing mode, then it cannot access

to Internet by its virtual IP)

˙162.172.50.xx, it uses Routing mode through WAN1 (The Internet Server can see your

IP 162.172.50.xx directly). And uses NAT mode through WAN2 (The Internet Server

can see your IP as WAN2 IP)(Figure2-9)

Figure 2-9 Multiple Subnet Network

 The SMC BR21VPN’s Interface Status:

WAN1 IP： 10.10.10.1

WAN2 IP：211.22.22.22

LAN Port IP：192.168.1.1

LAN Port Multiple Subnet：162.172.50.1

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 250 251

Pas de commentaire

Smc-networks SMCBR21VPN Manuel d'utilisateur Page 38