Smc-networks SMC9432BTX Manuel d'utilisateur télécharger pdf (Page 22)

2-4

NETWORK CABLE CONNECTION

Connecting a Thin Coax Cable

The SMC9432BTX provides a BNC connector that supports a thin

coax cable network connection (see Figure 2-2). Connection to a

thin coax cable requires a BNC T-Connector, as shown in Figure

2-3 on the next page.

Figure 2-2. BNC Connector Port (SMC9432BTX)

Use the following procedure to make a BNC connection to the

network.

1. Align the T-Connector's slots with the pins on the network

card's BNC port, push in the T-Connector, and twist the collar

clockwise until it is securely in place.

2. Attach one end of a thin coax cable to one side of the

T-Connector.

3. Attach one end of another thin coax cable to the other side of

the T-Connector. If the network card is at the end of the cable,

attach a 50-ohm terminator to the T-Connector, as shown in

Figure 2-3.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Pas de commentaire

Smc-networks SMC9432BTX Manuel d'utilisateur Page 22