Smc-networks 10/100 Mbps Manuel d'utilisateur télécharger pdf (Page 46)

ROUBLESHOOTING

the network card is installed. Ensure that the slot is configured for

level-triggered interrupts instead of edge-triggered interrupts. An

example of typical PCI parameters follows:

PCI Slot #: (slot number where the network card

is installed)

Master: Enabled

Slave: Enabled

Latency Timer: 40 (range is 20 to 255)

Interrupt Type: Level-Triggered

Interrupt Number: (choose any number the BIOS Setup

supplies that does not conflict with

another installed card)

Note: The wording of these parameters varies with different

computers, and not all parameters may be configurable.

Always consult your computer manual for information on changing

motherboard jumper settings and BIOS Setup program parameters for use

with PCI network cards. If you set a motherboard jumper and modify the

computer’s BIOS Setup, make sure the jumper and BIOS settings match.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54

Pas de commentaire

Smc-networks 10/100 Mbps Manuel d'utilisateur Page 46