Smc-networks SMC TigerStack IV SMC6224M Manuel d'utilisateur Page 405

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 522
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 404
M
IRROR
P
ORT
C
OMMANDS
4-157
The destination port is set by specifying an Ethernet interface.
The mirror port and monitor port speeds should match, otherwise
traffic may be dropped from the monitor port.
You can only create a single mirror session.
Example
The following example configures the switch to mirror received packets
from port 6 to 11:
show port monitor
This command displays mirror information.
Syntax
show port monitor [interface]
interface - ethernet unit/port (source port)
- unit - Stack unit.
(Range SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4)
- port - Port number. (Range: 1-26/50)
Default Setting
Shows all sessions.
Command Mode
Privileged Exec
Command Usage
This command displays the currently configured source port,
destination port, and mirror mode (i.e., RX, TX).
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6 rx
Console(config-if)#
Vue de la page 404
1 2 ... 400 401 402 403 404 405 406 407 408 409 410 ... 521 522

Commentaires sur ces manuels

Pas de commentaire