Smc-networks SMC TigerAccess SMC7824M/FSW Manuel d'utilisateur télécharger pdf (Page 172)

Web – Click Security, Port Security. Set the action to take when an invalid

address is detected on a port, mark the checkbox in the Status column to

enable security for a port, set the maximum number of MAC addresses

allowed on a port, and click Apply.

Figure 7-1 Port Security

CLI – This example selects the target port, sets the port security action to

send a trap and disable the port, specifies a maximum address count, and

then enables port security for the port.

Console(config)#interface ethernet 1/5

Console(config-if)#port security action trap-and-shutdown 22-3

Console(config-if)#port security max-mac-count 20

Console(config-if)#port security

Console(config-if)#

Pas de commentaire

Smc-networks SMC TigerAccess SMC7824M/FSW Manuel d'utilisateur Page 172