Smc-networks 100 Manuel d'utilisateur télécharger pdf (Page 63)

ABLES

B-3

RJ-45 Port and Cable Assignments

CAUTION: DO NOT plug a phone jack connector into any RJ-45

port. Use only twisted-pair cables with RJ-45

connectors that conform with FCC standards.

The RJ-45 port on the SMC6900GT module supports 1000, 100,

and 10 Mbps Ethernet operation, with auto-negotiation of speed,

duplex mode, and flow control.

1000BASE-T Pin Assignments

1000BASE-T ports switch support automatic MDI/MDI-X operation,

so you can use straight-through cables for all network

connections to PCs or servers, or to other switches or hubs. In

straight-through cable, pins 1-8, at one end of the cable, are

connected straight through to pins 1-8 at the other end of the

cable.

Use 100-ohm Category 5 or 5e unshielded twisted-pair (UTP) or

shielded twisted-pair (STP) cable for 1000BASE-T connections.

Also be sure

that the length of any twisted-pair connection does not

exceed 100 meters (328 feet)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 89 90

Pas de commentaire

Smc-networks 100 Manuel d'utilisateur Page 63